You have no items to compare.
Starting at: $1.02
A – Loctite 221
E – Anti-Seize
I – Lithium-Base Grease
O – Engine Oil
a – With 2 rings, Standard;
b – With 2 rings, 1st Oversize;
c – With 2 rings, 2nd Oversize;
d – Standard Size;
e - 1st Oversize;
f – 2nd Oversize;
g – ATTENTION: Use only once
Starting at: $0.12
a – RED 67.50 MM - 67.51 MM, GREEN 67.51 - 67.52 MM;
b – Cylinder PTO side;
c – Cylinder MAG side
Starting at: $0.12
I – Lithium-Base Grease
X – Adhesive
AR – As required
Starting at: $0.12
AR – As required
a – Air guide, carburetor side;
b – Air guide, exhaust side
Starting at: $0.00
A – Loctite 221
I – Lithium-Base Grease
a – For configuration free-air-cooled;
b – In a roll/Sold per meter (39");
c – For magneto flywheel new version (with closed cage), Torx screw also valid for old version. At disassembly and reassembly of the screw, the thread has to be cleaned of the remaining coating and secure with Loctite 221. As an alternative a new screw can be used.
Starting at: $1.54
a – Useable for engine type 447 UL, 503 UL, 582 UL 90/99 and 618 UL;
b – For adjustment and control of the ignition timing;
c - To cover the crankcase;
d – To hold the oil pump gear;
e – To hold the magneto flywheel;
f – For magneto fly wheel;
g – For ball bearing 6206, crankshaft magneto side;
h – For ball bearing 6207, crankshaft;
i – For ring halves;
j – For puller;
k – For crankshaft PTO side;
l – For crankshaft magneto side;
m – For ball bearing