Search results for 'SPARK PLUGS AND ACCESSORIES'

A – Loctite 221
B – Loctite 243
C - Loctite 648

c – Tighten to leave 1mm distance between starter cover and electric starter

a – For installation of cylinder on the piston 67.5 mm;
b – For installation of cylinder on the piston 72 mm;
c – To hold the fan;
d – For aligning of cylinders at the intake flange;
e – For crankshaft bearing PTO side;
f – For positioning of crankshaft bearing PTO side;
g – For centering of the stator plate;
h – For piston pin 18 mm;
i – For installation of piston pin circlip 18 mm;
j – For the engine;
k – Without ignition and externals

a – For internal hex. screw;
b – To remove the gear cover;
c – To compress the dog gear;
d – For drive gear, I=2,00, I=2,24, I=2,58;
e – For oil seal 850055;
f – For gearbox configuration "B";
g – For oil seal 930715;
h – For oil seal 950085 and 950084;
i – For oil seal 933675;
j – To remove the layshaft gear; 
k – To remove the flywheel; 
l – For mounting the hardy disk;
m – For gearbox configuration "C";
n – For gearbox configuration "E"

AR – As required

a – If installed with filter on top;
b – If installed with filter on bottom;
c – not available as a spare part

B – Loctite 243

AR – As required

A – Loctite 221
Q – Silastic 732 RTV

AR – As required

a – Cooling surface 3,2 dm² (49,6 in²);
b – From engine S/N: 3,916.823;
c – Up to engine S/N: 4,916.822;
d – For evacuation of air, at installation of engine with spark plugs down;
e – Longer studs for 582 UL Mod. 90. Not used on 582-99;
f – Sold by the meter (39”)