Shop by Phone 1-800-532-3462

Shopping Cart

0 item $0.00

My Cart -

0 item
Shop By

Currently Shopping by:

  1. Category: ROTAX Engines & Parts
Category
  1. New ROTAX Engines (1)
  2. Genuine ROTAX Parts (94)
Compare Products

You have no items to compare.

Search results for 'SPARK PLUGS AND ACCESSORIES'

  1. Starting at: $0.17

    b - Double ignition coil with high tension threaded connection, c - Double ignition coil and ignition cable with plug connection

  2. Starting at: $2.83

    B – Loctite 243


    a – Note Service Instruction SI-912-005 current issue

  3. Starting at: $0.00

    A – Loctite 221
    B – Loctite 243
    C - Loctite 648


    c – Tighten to leave 1mm distance between starter cover and electric starter

  4. Starting at: $0.00

    B – Loctite 243
    I - Lithium-Base Grease
    AG – Silicon Heat Compound

     

    a – Sold by the meter (39");
    e – Not necessary at intake manifold P/N 867688;
    f – Introduced as S/N 04.0388 with altered insulation only for spare parts;
    g – Not suitable for crankcase P/N 886354, P/N 886358 and older;
    h – At crankcase P/N 888364 or newer crankcase;
    i – Not suitable for intake manifold P/N 867688;
    j – Necessary at version with ring mount;
    k – Sold by the meter (39");
    l – Use P/N 842742 and 953390 only together;
    m – SI-912-013 / SI-914-016 current issue. See Maintenance Manual Heavy of the respective engine type, current issue. From engine 912 UL S/N 4,406.291, 912 ULS S/N 5,643.680, 914 UL 4,418.712;
    n - In a roll, silicone hose 120 mm;
    o – SI-912-020 / SI-914-022 current issue;
    p – 1x lock washer A6 P/N 945751 is not needed after production-year 2010 on position between the bracket 2 P/N 851267 and the hex nut M6

  5. Starting at: $1.59

    a – For installation of cylinder on the piston 67.5 mm;
    b – For installation of cylinder on the piston 72 mm;
    c – To hold the fan;
    d – For aligning of cylinders at the intake flange;
    e – For crankshaft bearing PTO side;
    f – For positioning of crankshaft bearing PTO side;
    g – For centering of the stator plate;
    h – For piston pin 18 mm;
    i – For installation of piston pin circlip 18 mm;
    j – For the engine;
    k – Without ignition and externals

  6. Starting at: $7.10

    a – For internal hex. screw;
    b – To remove the gear cover;
    c – To compress the dog gear;
    d – For drive gear, I=2,00, I=2,24, I=2,58;
    e – For oil seal 850055;
    f – For gearbox configuration "B";
    g – For oil seal 930715;
    h – For oil seal 950085 and 950084;
    i – For oil seal 933675;
    j – To remove the layshaft gear; 
    k – To remove the flywheel; 
    l – For mounting the hardy disk;
    m – For gearbox configuration "C";
    n – For gearbox configuration "E"